How to make a closet.
The Cabinet in the wall – ideal for space saving. We will show you an example of a closed Cabinet with a door. You're on this example, can embody any of your fantasy with my own hands!
Materials and tools:
* based on closet size 565 mm 1605 at:
1. About 4.5 m of the separated beam diameter 52 × 62 mm frame
2. Panel wood 1600 × 45 mm for door or the door
3. A thin sheet of sandpaper
4. Stain, varnish or beeswax
5. Door hinges
6. Door lock
7. Saw, glue
Process:
1. Prepare the opening in the wall the size of the future Cabinet.
2. Collect rectangular frame, which will perform the functions of the door frame and jamb. It is made of two side uprights and two rails — top and bottom. All parts are manufactured from the separated bars with cross 62х52 mm, on which is the fold size 40х12 mm. the ends of the rails are cut at an angle of 45 degrees.
3. Glue the frame so that the corners were exactly 90 degrees. For rigidity at the ends of the parts, you can make the deaf grooves and insert the dowels.
4. Insert the frame into the opening. The emphasis of the outside seam should be at the inner edge of the opening. The inner side of the partition frame must be restrained by a support rail attached around the perimeter.
5. Doing the door. You can buy the finished product, and you can do it yourself. The size of the door depends on the size of the aperture (in our example, the desired door size 1594х539 mm). Instead of opening standard doors to make sliding.
6. The door is polished by fine emery paper. Then you can paint it with paint or stain, varnish or RUB with beeswax.
7. When the door is dry and secured to the outer end of the left rack obvjaza upper halves of three decorative door hinges. The bottom part of the hinges mounted on the frame.
8. If necessary, insert door lock with decorative escutcheon on the keyhole.
The Cabinet in the wall – ideal for space saving. We will show you an example of a closed Cabinet with a door. You're on this example, can embody any of your fantasy with my own hands!
Materials and tools:
* based on closet size 565 mm 1605 at:
1. About 4.5 m of the separated beam diameter 52 × 62 mm frame
2. Panel wood 1600 × 45 mm for door or the door
3. A thin sheet of sandpaper
4. Stain, varnish or beeswax
5. Door hinges
6. Door lock
7. Saw, glue
Process:
1. Prepare the opening in the wall the size of the future Cabinet.
2. Collect rectangular frame, which will perform the functions of the door frame and jamb. It is made of two side uprights and two rails — top and bottom. All parts are manufactured from the separated bars with cross 62х52 mm, on which is the fold size 40х12 mm. the ends of the rails are cut at an angle of 45 degrees.
3. Glue the frame so that the corners were exactly 90 degrees. For rigidity at the ends of the parts, you can make the deaf grooves and insert the dowels.
4. Insert the frame into the opening. The emphasis of the outside seam should be at the inner edge of the opening. The inner side of the partition frame must be restrained by a support rail attached around the perimeter.
5. Doing the door. You can buy the finished product, and you can do it yourself. The size of the door depends on the size of the aperture (in our example, the desired door size 1594х539 mm). Instead of opening standard doors to make sliding.
6. The door is polished by fine emery paper. Then you can paint it with paint or stain, varnish or RUB with beeswax.
7. When the door is dry and secured to the outer end of the left rack obvjaza upper halves of three decorative door hinges. The bottom part of the hinges mounted on the frame.
8. If necessary, insert door lock with decorative escutcheon on the keyhole.
Комментариев нет:
Отправить комментарий