The top three houses, which I would like to take out a mortgage

The top three houses, which I would like to take out a mortgage
One-story wooden house of laminated veneer lumber thick section in the North American style of houses reflects the originality and genuine male character.

The combination of solid wood, stone elements and at the same time, the large area of glazing shows charisma and openness of character of the owner.
Spacious home with one floor has a convenient layout with a shared living-dining room, a cozy terrace and a separately located bedrooms. A truly unique project, GOOD WOOD, best embodied the aesthetic quality of a house of such style and ease of living.

Next home
Houses from glued beams.

Some people think that the construction of wooden houses in our time "out of fashion", is outdated and in the past. This opinion is a fallacy, because in recent years there has been a steady growth of orders for wood construction and primarily of laminated veneer lumber.

Many types of wooden houses being built today are increasingly began to order the house of laminated veneer lumber. The reasons for this are many, but we will review a few basic.

Generally, any wooden building material dries quite changes its quality and appearance, and not for the better. Logs can crack along the stem axis, and the beam is to bend and twist. Moreover, any wood during drying shrinkage, and this complicates subsequent work, including finishing.

Glued laminated timber is radically different from other wooden construction materials. It is produced by special technology, by gluing, which is easy to understand the name of the material. Specially prepared and dried boards are glued together in such a way that their fibers are moving towards each other, which prevents deformation and warping of the material. Because the material is well dried at the stage of preparation for construction, is built of him the house would not be subject to shrinkage, as other wooden houses.

This special treatment of the material, physical and geometric characteristics do not change, neither during construction, nor after its end.

The technology of manufacturing laminated veneer lumber and suggests other possibilities: the beam can be done such thickness and length of what is required for the construction of a particular house. Solid wood is almost impossible to produce timber, for example, twelve meters length.

The third house in Scandinavian style

Scandinavian style is known for the predominance in the interior of natural materials with pastel colors and dairy. It is characterized by the predominance of open, bright spaces with simple and comfortable pieces of furniture.
The Chalet-style

The Chalet — many know it as an Alpine Lodge. Such structures are characterized by a combination of wood and natural stone, the presence of open wooden structures, beams, consoles, and the interior design – animal skins, probably of plaster casts of animals. In the heart of the house is the fireplace, usually, preference is given to the outdoor furnace.
In the Eastern style, of course, all has to do with Chinese, Japanese or Indian culture with aquarium fish, paper partitions, numerous textiles, outdoor terraces and the teachings of Feng Shui.

Lenka mortgages present

For sale country residence (mansion) of the elite class.
50 miles from London.
Small enclosed gated community near the villages.
The individual project will last for 15 years.
And the cost was 35 million euros.
Due to the urgency, put up for sale residence, just 20 million euros!

Unique country house is not just a place for recreation and permanent residence, this home is the embodiment of Deluxe. It combines a huge space, wonderful garden, plenty of room, comfort, luxury and safety. After purchasing this mansion, You are not only profitable invest your money, but also get all the amenities of the modern world. After all, what could be better than your own home town, with nice clean air, away from the hustle and bustle.
Suburban mansion built on an individual project and will be a great gift for those who value the future and the present of his family. The house with area of 1500 m2 there is everything you need to modern man:
gym;
swimming pool (300 m2);
home Church;
cinema;
billiard room;
wine cellar;
sauna;
winter garden;
a restaurant with disco;
Laundry room;
lift;
elegant living rooms and more.

In addition to the main 5-storey eight-level mansion the property has a guest cottage in 2 floors (120 m2) and a house for staff with garage for three cars (115 m2).

The mansion is conveniently located geographically. Moreover, the house is built in the elite cottage settlement, a well-guarded round the clock. The village itself is located on the beautiful banks of the river surrounded by century-old forests, so You will daily enjoy the beauty of nature and fresh air.

The pride of the mansion is a fireplace hall with an area of 125 m2 with a high (9 m) ceiling. The room is designed in the style of the times of chivalry. Here You will find a unique fireplace of huge dimensions, a bar, a stage and large dance floor. The natural wood and natural stone makes this room truly the epitome of mystery and secrecy.

Another unusual place in the house is a tavern. The materials of aged oak give the room a special appeal. Italian oven special can create the most exquisite dishes, to cook delicious dishes in a closed method or directly on the coals.

Only on site 10 bathrooms, 9 bedrooms, 7 kitchens and 4 toilets. All the rooms are large in size and beautiful design. The magnificence and grandeur of the beautiful Palace of fine style along with innovative technologies and modern devices for comfort and coziness from leading manufacturers and brands.

Lighting of rooms and halls are the lamps from "Pylman" and "Swarovski", refrigeration equipment from "Liebherr", oven "Ilve Majestic", plumbing "Jado", appliances "Miele", toilets, bidets and sinks from "Villeroy & Boch" hardware "Dorma", etc. Be sure that no visitor will leave without a slight feeling of envy and admiration when you step onto the threshold of Your new home!

A mansion surrounded by an exotic garden with beautiful roses, shrubs, trees (which, by the way, there are more than a hundred species), and green lawns. 30 acres is a pond, fountain, waterfall, Alpine, Italian barbeque "Palazzetti". And in the gazebo with its own kitchen in the evenings You can enjoy Your favorite cocktail under the pleasant music.

documents and services lenka mortgage

My dear customers, today I wanted to share with you the services that need to provide rent and mortgage of houses and land. Before starting the contract, make sure that the firm is time-tested, view the list of services.Such firms need to provide the following services and consultations:
PRIVATIZATION, REGISTRATION of ownership of the Property
-Privatization of housing, covering alterations
-Privatization of the room, a bit
-Privatization of land for housing
-Privatization of garages, garage cooperative
-Privatization of the ground area
-Any paid real estate

RENT
-Conclusion of the contract of lease of the land plot, premise, structure, construction
-Assignment of lease rights
-Registration of a lease
-Renewal of lease the right accessories

The accompaniment
-Full ensemble suggestions for search and analysis You are interested in services, lease and resale of real estate every
-Collection and preparation of documents on the ground area, an important role in trading
-Representation of interests while executing trades on the basis of notarized power of attorney
-Analysis of agreements, any documentation
-Validation of design documents
-Changing the shape allowed the use of soil
-Preparation of package of documents for state registration
-Registration of rights at the Federal service of state registration, cadastre and cartography in the Republic of Kazakhstan
-Preparation and accompaniment of contracts of purchase and sale of real estate every
-Registration of the transfer of ownership

Questions and answers from dear readers for lenka mortgages

Questions and answers from dear readers for lenka mortgages

decided to buy a mortgage for a private house. Sberbank has approved 2,800 thousand chose the house, filed papers. need 1160 dollars. the Bank was requested to update the cadastre on the ground, but, as the specialist said the Bank:"everything is OK, just a formality". made, passed.summary: the Bank gives 632400! how so? specialist Bank, as I understand it, itself with such did not face. the third time the documents are sent, the result is the same. why can this be? and what to do? few banks give mortgages to ordinary wooden house
ituacu interesting.I think all the matter in the object. Try another home to choose. Perhaps the Bank believes that this is not enough liquid
comments the object was not. as I explained in the Bank, they said. was a comment that you want to update the cadastre on land and make survey of the site. did. the result is known. and no official explanation. by the way, sent the second time the same request, the amount is reduced to 595 thousand
Another question.
My husband has served 3 years on contract in the infantry troops,now signed another contract ,but in the other part.
Can he now take advantage of a military mortgage,if any report is not written and not entered? Or are you going to write a report,to be a member of the program and to wait another 3 years??
the answer
We have to report and join the program to ensure that accumulated money in the account at the moment of signing of the mortgage contract and the contract of sale of an apartment.

Your house needs a ventilation system that will provide fresh air in closed rooms

Your house needs a ventilation system that will provide fresh air in closed rooms. The ventilation system based on natural supply and exhaust ventilation, which is achieved through the creation of exhaust openings. How to cut the vent yourself, you will learn from our article.

Ventilation holes are generally placed in areas of the greatest contamination is the kitchen, bathroom, WC.

Making a round exhaust port

In order to make the necessary opening of the duct, which subsequently will need to put a vent box, you will need a core drill for stone.

Primarily protect against dust and noise: gloves, mask and earplugs.
Mark the center of the future hole, and start drilling using conventional drill bits for stone. Next it will be the guide for the core drill.
Hold the drill in a horizontal position (slightly tilted down), cut the opening of the cylindrical part of the tool.
When finished, carefully remove the cut material from the wall.
Remove dust and dirt from the walls of the resulting hole.

Then you can begin the installation of the ventilation box!

Water flows

These designs as a coolant use water. Water flows from the riser or from the Central heating system. However, these floors require a pump without water will not circulate, respectively, will not and heating. Of course, you can mount system so that the water is in motion due to gravity, i.e. to the carrier, like "flowed" from the source at the end of the wire. However, this task is very difficult, and heating system area will not be too great.

Vodnany warm

Advantages:
Compared with electric floor heating, installation of water cheaper.
High quality heating at a low cost, for the energy carrier (water) is cheaper than electric energy.
Disadvantages:

There is a danger of damage to communications and, therefore, leaks.
If the pressure in the water system will fall, you will not be able to do without the water pump.
The use of water "warm floor" is considered to be unfair to others if source of water is heating. The water is passing throughout the system returns to the Central heating system and is sent to the neighbours, but already in a more chilled state. It is for this reason, in most apartment buildings it is forbidden the use of water Underfloor heating.
For mounting of water floor heating require the sanction of the relevant services, without notice as these services cannot be connected nor to water, nor Central heating.

To recap:
In normal, flat conditions, mounted system electric Underfloor heating: they do not require a pump, and it's not threatened by the danger of leaks. However, if the area that requires heating, is very considerable, it is preferable to use a water heat-insulated floor, because the power savings will affect the condition of your wallet. Most often water Underfloor heating used in private country houses and cottages.

Underfloor heating in the modern world lenka mortgages

Underfloor heating in the modern world lenka mortgages is becoming an indispensable element of a comfortable suburban home or apartment. As you know, there are two most popular options of "warm floor" – electric or water. Our material will certainly help you to make a choice by providing comparative characteristics of each option!

Electric "warm floor"
Are wires of special alloys, designed specifically for the fact that the electricity was converted to heat. The total heat produced by the electric "warm floor", can be adjusted by means of thermostats, which are installed indoors.

Advantages:
Construction designed for long life, it is more resistant to external mechanical impact (compared to a "water" system).
The relatively small cost of electricity used. Do not assume that because of the presence in the house is electric Underfloor heating the electric bill will be off scale. Actually "warm floor", which consumes a current not more than an ordinary household appliance.
Disadvantages:

Passing electricity through the wires will cause, though slight, but still electromagnetic radiation, which is not the most favorable impact on the ecology of the internal environment.
Installation of electric Underfloor heating can not be called cheap.
Water Underfloor heating

Choosing a decorative finish for steel doors.

Choosing a decorative finish for steel doors.

The main advantage of steel doors is its practical functionality, but appearance also matters. The door is the first thing guests see, getting into your home, you don't want to pre-create the wrong impression of his cozy apartment? Then refer to our material that will allow you to successfully pick up a decorative finish for steel doors.

Vanilla
Usual eye and not too expensive option to decorate the outer and inner planes of the front door. Some regularity the final appearance is offset by good performance properties, providing vanillie continuing popularity.

Note that today there are several different ways of facing the door leaf vanillia:

1. Pasting (directly on metal or via layer of batting).
2. Install panels from vinilli (material upholstered the sheets of hardboard that are further nailed to the door with decorative nails).
3. Small upholstery nails around the perimeter.

The appearance of doors finished in the same of vanillia, can be strikingly different from each other. Similar diversity is connected with the possibility of decoration of the door buttons that pinch the soft filler under the skin, creating the effect of a "blown" coverage.

Advantages: flexibility and strength, hygiene, resistance to abrasion, resistance to abrasion and low temperature, good heat and sound insulation (especially for panels).

Disadvantages: no protection from vandals (leather is easy to cut, soiled and melted from the fire), standard finishes.

Laminate
Sleek and elegant coating "wood" color is a perfect imitation of a noble texture of natural wood. Laminate faced door from the first sight it is not easy to distinguish from the analogue from the array, while the price will please you with its comparative modesty.

Advantages: economical, strong resistance to shock (oxalacetate to the door with a sledgehammer strictly not recommended), the susceptibility to UV rays, decorative.

Disadvantages: low level of thermal and acoustic insulation, the impracticality of using this coating for the decoration of street-doors (laminate does not tolerate temperature changes), the variety of colors is limited by the impossibility of matching of the tinting.

Installation of lighting for stretch ceiling. Lenka mortgages

Installation of lighting for stretch ceiling. Lenka mortgages

For the organization of competent lighting in the stretch ceiling use lamps with tungsten filament, fluorescent or halogen. If you plan on their normal setting (no heat ring), it should be limited to incandescent lamps with a power of 50 W fluorescent or halogen and with a power of less than 35 watts. If you want to install more striking instruments we need to equip them with additional insulation so that the blade does not overheat and does not SAG.

There are several models of lamps designed specifically for use on suspended ceilings. The first type of steel lamps that are injected in the ceiling. With their help it is possible to achieve spot lighting of objects in the room and its various sections. The maximum power of the bulb is 50W. In addition, there is a special model with water protection.
Another model is the so – called cardan lamp, for which you can adjust the position of the reflector in the vertical and horizontal planes. Due to this light is directed to the desired point of the room.

Preparation.
The mounting points of the lamps are laid out on the ceiling, they are fed wire. At a basic ceiling mounted racks for lamps.

The wiring is held to the mounting of spotlights and chandeliers. Then install the brackets, special fasteners under the lights and under the chandelier.

Installation of lighting fixtures produce ceiling mounted, fittings or special mounting element.
In the right place ceiling cut, paste over the holes on the perimeter of a special ring, make the issue of electrical wiring, plug in the lamp.

As is known, installation of lighting fixtures produced in the last stage of the installation of stretch ceiling.
On the canvas in the place of attachment of the lamp are glued plastic ring. They will not give the material a break. After stretching the fabric on the outside through the holes of the uprights will be attached to your chosen lamps.

Installation.
1. To install the built-in lamp, the ceiling is applied with special profile round shape in the place where before the installation of the ceiling was set stand for the lamp.

2. The profile adheres strictly under the counter.

3. Then, the part of the canvas, with which the profile was glued to the front, cut along the contour of its inner surface.

4. Then through the resulting hole "pulled out" wiring of the future lamp, and the hole is enclosed with a decorative profile.

5. Then follows the installation of the lamp. Before connecting the lamp to the body is put on one or more insulating rings.

6. The final operation is the adjustment of the set lamp according to the level of the stretched ceiling. It's quite easy because everything is visible to the eye. It only remains to screw in a light bulb and enjoy the result.

It is not recommended to mount a large number of built-in fixtures – there are certain constraints on power and temperature heating.

Also among popular spotlights waterproof, they can be installed in bathroom, swimming pool, sauna and other rooms with high humidity.
These lamps are protected by glass and silicone gaskets, they do not permit the entry of fumes and water into the lamp. If you want to save on electricity and use low-power lamps, will put the transformer behind the suspended ceiling. Some designs of spotlights allow you to "play with light", ie to direct the luminous fluxes in different directions and create interesting effects in the interior.

If a suspended ceiling is already installed, you can put the overhead lights. They are more economical and universal, easy fit for apartments. Similarly to the home environment more suitable for elegant lighting pendant, lighting rods, sconces. Overhead lights are also just attached to the suspended ceiling, only need to take into account a certain distance from the lamp to the surface

The main advantages of these systems. Lenka mortgages part 2

The main advantages of these systems. Lenka mortgages part 2
The systems designed to protect against leaks, has a lot of advantages.

1. The kit included valves. They provide reliable and resistant to maximum loads. The valves consume electricity only at the time of opening and closing. The rest of the time they do not consume electricity. Even if you are not long in the room where there was a flood, then rest assured everything is under control. Without your participation, the water will not arrive in your home, even if you turn off the light or the batteries will sit.

2. Some modern system is equipped with valves, which are able to self-clean. Once a month, the valves are automatically driven, which prevents it from souring. This ensures trouble free operation for a long time.

3. Indicating light will help you control the operation of the system. If you see a single flash every six seconds, then the system is working successfully. If the flash double flashes, then you have blocked the valves. Continuous flashing with an additional audible signal will tell you that there's trouble. If there are no signals, it means one thing: there is no power neither main nor backup. Check the system.

4. If you have the ability to connect to your system unlimited number of sensors, this will be an additional advantage. Very nice is the ability to change the sensitivity of the sensors. The change in sensitivity produces a thin screwdriver. To decrease the sensitivity, turn the knob clockwise to increase, in the opposite direction. So, a splash of water to the sensor under strong sensitivity, the valves will constantly turn off the water. If the sensors are slightly "zagrabiti", that is, to reduce the sensitivity, then small drops of water will not be blocked.

5. System of protection against leakage can be connected to other systems, such as: "Smart home", which gradually enters into our lives, burglar alarm, GSM alarm, when connected you will receive an SMS stating that the system has locked the water in case of activation of the device.

6. System easy-to-install; to install them is not necessarily special education it can make any owner with a basic knowledge about plumbing work. If you do not possess such knowledge and skills, then hire a professional. It will cost you inexpensive, but you can be sure that everything is done correctly. Kits include everything needed to install.

7. Systems approved for use at home.

For proper operation of the devices, it is necessary periodically to carry out maintenance work. Every three months it is advisable to clean the sensors from dust and dirt. For this we need to wipe them with a soft cloth stripes gold-plated contacts on the sensors. If you wipe these contacts less often than once a year, it may give false positives. Sensors can be triggered to conductive dust. If there is a leak, you need to wipe the sensor with a cloth; if it is completely wet, you can dry it with Hairdryer.

The system of protection against leaks a guarantee of your peace of mind and good relations with neighbors. Even in the event of an accident, it for three seconds will prevent it, and will not allow water to reach a neighbor's apartment. The price of casasito comparable with investments made for 10 sq. m not the very expensive flooring. And the damage caused by a plumbing accident, may be assessed where large numbers.

Automatic system of protection against leakage of water. Lenka mortgage advices

Automatic system of protection against leakage of water. Lenka mortgage advices

The question of the protection of the home against leaks quite relevant. The majority of accidents in the home happening in the field of water supply facilities. There is therefore a need to protect your apartment from this trouble, rather, from its consequences. For anybody not a secret that water can cause very great damage. In the best case, will have to make repairs in the apartment, at the worst, to deal with the neighbours from the lower floors. Well, if you've got everything covered and insured their property and potential loss of neighbors. And if not?

There is a solution, although not everyone is aware of it. Currently there are several companies that produce the system of protection against leaks. They are all worthy of our attention. What are the systems of protection against leaks?

As a rule, protection against water leaks is an electro-mechanical apparatus, comprising:

1. Water sensors, the size of a matchbox, which serve to identify the need to turn off the water;
2. The controller is the most important unit, in which there are all the process of "thinking", namely processed signals coming from sensors, and decides on the necessity of overlapping the water supply;
3. The valves with integrated electric drive, which, in fact, block the water.

Units operate from the mains, but in many of them, at the time of a power outage backup power is connected, which happens in alkaline batteries. Because of this you can be assured that the water leakage protection is under constant supervision.

How to make a closet. lenka mortgages

How to make a closet.

The Cabinet in the wall – ideal for space saving. We will show you an example of a closed Cabinet with a door. You're on this example, can embody any of your fantasy with my own hands!

Materials and tools:
* based on closet size 565 mm 1605 at:
1. About 4.5 m of the separated beam diameter 52 × 62 mm frame

2. Panel wood 1600 × 45 mm for door or the door

3. A thin sheet of sandpaper

4. Stain, varnish or beeswax

5. Door hinges

6. Door lock

7. Saw, glue

Process:
1. Prepare the opening in the wall the size of the future Cabinet.

2. Collect rectangular frame, which will perform the functions of the door frame and jamb. It is made of two side uprights and two rails — top and bottom. All parts are manufactured from the separated bars with cross 62х52 mm, on which is the fold size 40х12 mm. the ends of the rails are cut at an angle of 45 degrees.

3. Glue the frame so that the corners were exactly 90 degrees. For rigidity at the ends of the parts, you can make the deaf grooves and insert the dowels.

4. Insert the frame into the opening. The emphasis of the outside seam should be at the inner edge of the opening. The inner side of the partition frame must be restrained by a support rail attached around the perimeter.

5. Doing the door. You can buy the finished product, and you can do it yourself. The size of the door depends on the size of the aperture (in our example, the desired door size 1594х539 mm). Instead of opening standard doors to make sliding.

6. The door is polished by fine emery paper. Then you can paint it with paint or stain, varnish or RUB with beeswax.

7. When the door is dry and secured to the outer end of the left rack obvjaza upper halves of three decorative door hinges. The bottom part of the hinges mounted on the frame.

8. If necessary, insert door lock with decorative escutcheon on the keyhole.

Soundproofing interior doors lenka mortgage

Soundproofing interior doors lenka mortgage

The door in the house between rooms often hollow, empty inside, and therefore permeable to light and noise. Meanwhile, closing the door, I want to seek silence and solitude. To achieve this quickly and easily.

You will need:
1. Insulating boards from fiber impregnated with bitumen or synthetic resin.
2. Mastic.
3. Self-adhesive seal.
4. The pad on the door.
5. Screwdriver and screws.

Process:
1. Stick with the mastic on the door from the side where it is closer to the source of the noise-absorbing plate and install them back to back to each other.
2. So no sound broke through the crack under the door, stick the self-adhesive seal on the jambs of the doorway.
3. Attach screws to the bottom edge of the door sound-absorbing pad.

If you are acquiring a house mortgage. you should not waste money on a masters, all you can do with your hands, all this can read on my website. With Love to You, Elena.

The wooden house for lenka mortgage

The wooden house for lenka mortgage, has many advantages, but there is one drawback, which someone confuses, and some don't. The fact is that between the logs form a gap, through which the house can get cold. How to get rid of these gaps? The answer is simple – to block.

If the structure was built of profiled or laminated Board with the connection groove-tenon, then used a roll of flax insulation, laid between the joists in the Assembly. In other cases you have to wait for the end of the period of the shrinkage of the house – six months for the first coropceni, year – for the second. Using felt, hemp, wool, hemp. It is also possible the processing of sealant.

The sealant used to coropceni, can be rubber or acrylic, but in any case it needs to be designed just for wood. This material is resilient, durable and provides reliable insulation of the house for many years. Work with a sealant can be conducted at temperature from -150 to +500C. Natural materials are recommended for large cracks. Consider the technology works with two types of insulation.

Let's start with the rubber sealant applied on the outer walls. It is relatively expensive but easy to use. You can choose one of three types of sealant: briquette mass, polymolecularity cord or a viscous mass. After installation of the sealant seam is treated with a sealing mass, which is applied by a special syringe or bag with a cut corner. Perhaps the use of electrogenerator, where you can choose the diameter of the forming nozzle from which the sealant is supplied.

Natural sealers are available in the form of webbing or cotton wool, and to work with them will require caulking, road Builder, a mallet or hammer. Working with natural materials, lasts longer than a sealant, as it covers both outside and inside.

The process takes place. Using caulk (the regulation task with a pointed tip) and hammer the seal into the seam, trying to hide there as much as possible the amount of material, after which give it the form of a roller, using the road Builder. To drive the seal carefully, starting with the upper, turning the bottom and aligning it hit in the centre.

Own wind turbines with their own hands. To rent a house in the mortgage

The energy can be produced literally out of thin air. From wind, to be exact. To do this, you will need the wind power station or wind turbine. This design can be done independently, and we report below on how to make a wind turbine rotary type power up to 2 kW.

What do we need? The generator power 12 V, gel or acid battery with output voltage of 12 V, a small container of stainless steel or aluminum with no holes, working the relay from charging the battery, switch, voltmeter, big box, two copper or aluminum wire (cross-section 2.5 and 4, length 1.5-2m), fasteners.

First, make the rotor and pulley for future installation. Divide the bottom of our metal container into 4 parts and cut, not reaching the center. We can also bend the blades clockwise. Fasten them to the pulley mounting bolts. To prevent the blades flew off, it puts between the bolt and nut engraver and washer.

Next plug wire. Let's number or note different wire markers, set in a box generator and collect the electrical circuit. Next plug-in car or another generator connected to the energy consumers. For this purpose, copper wire cross section 2.5 square. If possible wire cross section of 4 join the inverter, which transform existing 12 V to 220 V,

If you want to achieve greater or lesser efficiency of the generator, angle, arch the blades at an angle, allowing optimal rotation speed.

This simple turbines is enough to light up the patio, to keep the fire burning Lam energy saving, low-work techniques. However, remember that these wind turbines do not work when a strong hurricane, but on average are 3-5 years or more if the average activity of the wind is 5-20 km/s.

How to paint oven. Lenkamortgage for lending

How to paint oven. Lenkamortgage for lending

Stoves and fireplaces emulsion paint, oil, silicone or silicate paint with a matte or semi-gloss film.

Silicone paint black color used for painting the doors of the furnace and ash pit, and any black paint or lime – for valves and doors for cleaning the fireplace.

Dymosbornik cover and occasionally colored silicone paint, usually silver. The same paint used for painting of steel sheet, pre-cleaned. But predtopochnyj sheet of brass or light alloy not paint.

Furnace masonry covered with lime compounds or a mixture of organosilicon varnish KO-835 with enamels based on alkyd or GF, PF and PF-213. Metal casing painted with paints KO-84 AND KO-818, 822, 828, 5125, 174, 286, 198, as other film-forming paints on the basis of age rapidly, lose color and quality.

Before painting the stove is primed. To do this, take 2,5 kg of the limy test, 100 g table salt, 250 ml of wood glue and 50 ml of varnish. In the limy dough, stirring constantly, pour in 10 liters of water, then drying oil, dissolved in a liter of water salt and glue. The mass is stirred until homogeneous, then filtered and the pigment is added, consisting of 3 kg of the limy test, 100 g table salt, 100 ml of adhesive, 50 ml of linseed oil and 250 g of dry pigments. It may be ochre, red or yellow iron oxide, red iron oxide, ultramarine or blaniks.

Also you can put a picture on a primer coat with an airbrush or brush. Also use the forward and backward stencils, paint each brick separately.

homeowners decide lenka mortgage

More and more homeowners decide to use the balcony or loggia is not as a warehouse of unnecessary things, and as a resting place or an extra room. And start with the glazing, which can be cold or warm (tight), attach either a balcony or a loggia to the living room.

Cold glazing is performed using plastic, wooden or metal frames with normal, tinted or plexiglass. This is a good protection from rain, snow, dust and wind, but do not reduce street noise and increase the temperature by just 2-3 degrees, which allows the use of the balcony or loggia as a summer porch or utility room.

Easier and cheaper to make a glazing with light wooden frames with ordinary glass. However, this material has low resistance, therefore, the frame must be impregnated with special products that prolong their service life. If this is not done, the frame will last only a few weeks. In addition, when ordering such frames it is necessary to discuss all the details – size, cross section, thickness of glass etc. And most importantly – to apply only to professionals.

You can use metal profiles, which are considered the easiest and most reliable way, but if they were made of non-galvanized steel, you will have to carefully monitor them. Aluminium profiles with special needs do not need, but are very expensive and have a high thermal conductivity.

Frameless glazing looks like glass wall without frames and edging of the canvas which moves in an aluminum guide. It uses durable tempered glass of 6-8 mm thickness.

If you want a balcony or a loggia, a living room, you need to do a sealed glazing. However, in some cases the design is too heavy and can be used far not everywhere.

For sealed glazing used wooden or plastic frames with double glazing or glazing. This glazing eliminates the formation of cracks and provides reliable protection. Better not use wood because it's much heavier and bulkier, which is not very good for balconies, and it is also very expensive. The best option – window profile of reinforced polyvinylchloride. Of course, it is not as environmentally friendly as wood, but he is not afraid of atmospheric influences, reliably seals the room, durable, attractive, does not require special care.

If your intention is to combine the loggia and the bathroom, have to work hard. The first thing is to develop the project, to prepare. First with brick or other material close up the gap or close a decorative fence frame construction with insulation, causing interior and exterior walls, insulate the perimeter, floor, walls and ceiling of the loggia.

lenkamortgage advice on credit

In this group you can get FREE advice on credit.Mortgage,loan,competitive conditions and non-standard lending,cash loan,money for business,credit without references and guarantors,brokerage services,military mortgage,certificates and subsidies.Also here you can find an apartment or other real estate and get recommendations on real estate agencies and developers.Our opinion is authoritative and not biased.

The largest banks already issue mortgage loans with possibilianism for all categories of citizens.
Consultations on mortgage issues, estate mortgage without a down payment, a mortgage with damaged credit history, the lending country real estate and Commerce, as well as:
maternity capital;
- military mortgage;
certificates and grants;
Remember, if you take a mortgage and planned to leave with the child. maternity capital can be allocated so that the next three GDSs do not make the monthly payment? that is, to pay parent for three years, and then went out to work, to pay for the scheme? 
It is possible.pension Fund transfers the money,and the application of early repayment in the Bank you don't write